Show Commands - Equinox Systems Equinox Console Manager CCM1640 CCM1640 CCM1640 Installer/User Manual

Server SSH Command Parameters (Continued)
Parameter Description
AUTH=<auth> SSH authentication methods. You must enter the entire value;
abbreviations are not permitted. Valid values are:
PW
KEY
PW|KEY
KEY|PW
PW&KEY
KEY&PW
Default = PW

Show Commands

The Show command has several forms, as listed in the following table.
Show Command Summary
Command Description
Show Port Displays confi guration information and statistics for one or all ports.
Show Port Alert Displays port alert strings.
Show Server Displays CCM confi guration information and statistics.
Show Server CLI Displays CCM CLI settings.
Show Server PPP Displays CCM PPP settings.
Show Server RADIUS Displays CCM RADIUS settings.
Show Server Security Displays CCM authentication, allowed access method and Security
Lock-out settings.
Show Server SNMP Displays SNMP confi guration information.
Show User Displays user confi guration and session information.
Show Port command
The Show Port command displays configuration and status information about
one or all ports.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW PORT [<port>|ALL|NAMES]
Chapter 5: CCM Commands
Password authentication.
Key authentication.
Password or key authentication.
Key or password authentication.
Password and key authentication.
Key and password authentication.
71