Table of Contents
Advertisement
Server RADIUS Command Parameters
Parameter
Description
PRIMARY
Indicates the primary RADIUS server is being defi ned or deleted.
SECONDARY
Indicates the secondary RADIUS server is being defi ned or deleted.
IP=<radius_ip>
IP address of the RADIUS authentication server.
SECRET=<secret>
8-24 character text string for shared secret with the RADIUS server.
Enclose the string in quotes if it contains spaces.
USER-RIGHTS=<attr> Attribute number defi ned on the RADIUS server, in the range 1-255.
AUTHPORT=<udp>
UDP port for RADIUS authentication server, in the range 1-65535.
This value is usually 1645, but may be 1812.
Default = 1645
TIMEOUT=<time-out> Number of seconds to wait for a response from the RADIUS server,
in the range 1-60.
Default = 5
RETRIES=<retry>
Number of attempts to make to authenticate a user after a time-out,
in the range 1-10.
Default = 3
DELETE
Deletes the RADIUS server defi nition.
Examples
The following command specifies primary RADIUS server information; default
values will be used for the UDP port, time-out and retries values.
> ser radius primary ip=192.168.0.200 secret=ThePrimaryRadSecret
user-rights=86
The following command deletes the primary RADIUS server definition.
> ser radius primary del
Server Reboot command
The Server Reboot command reboots the CCM. During a reboot, any active
Telnet sessions, including your own, are terminated, and all users are
informed accordingly. Any CCM configuration changes that require a reboot
will become effective when the reboot completes.
When you enter this command, you are prompted to confirm or cancel the reboot.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER REBOOT
Chapter 5: CCM Commands
65
Advertisement
Table of Contents
