Environmental Conditions At Intended Installation Site(*) - Motorola RPU2160 Installation And User Manual

Whenever you need to expand the 2-way radios'
coverage in the same area but for different user's
groups, you can use multiple repeaters located at
the same site. For ensuring that the different
groups will not be interfering with each other and
that each one will have their private
communications, each repeater and the radios set
must have different channel settings (please refer
to 'Antenna Installation Instructions' on page 20
and 'Programming The Repeater' on page 38 for
more information). Additionally, for this case,
make sure the channel TX/RX frequency
separations between the different repeaters is at
least 1 MHz.
Note: For other requirements (environmental,
electrical and mechanical), make sure you
read sections ahead, especially information
related to equipment ventilation.
14
Environmental Conditions at Intended
Installation Site(*)
A key factor for repeater performance is to
accurately evaluate the site environment where
the repeater will be installed. Plan the installation,
paying particular attention to environmental
conditions at the site like temperature, humidity,
dust and ventilation.
The repeater may be installed in any indoors
location suitable for electronic communications
equipment or outdoors temporary/semi-permanent
installations, provided that the environmental
conditions do not exceed the equipment
specifications for temperature, humidity, and air
quality according to Mil 810 and IP55 ruggedness
specifications (For specification details, please
refer to 'Appendix A: Repeater Specifications' on
page 61).
Installation Guide