Motorola RPU2160 Installation And User Manual page 61

WHAT TO DO IF CLONING FAILS
The radio will emit an audible "bonk" indicating
that the cloning process has failed. In the event
that cloning fails, try performing each of the
following tests before trying to start the cloning
process again:
1. Ensure that the batteries on both radio and
repeater are fully charged.
2. Check the cloning cable connection on both
ends.
3. Ensure that the battery is engaged properly
on to the RDX radio.
4. Ensure that the RDX radio is in cloning
mode.
5. Ensure that the repeater is turned ON.
User Guide
49