Environmental Information; Material Content - Motorola MTR2000 Instruction / Field Service Manual

Base station, repeater and receiver

Hide thumbs Also See for MTR2000:

Table of Contents

Features

08/06/07

ENVIRONMENTAL INFORMATION

The material content of the MTR2000 is 16% of the product it replaces.

The following table provides a rough estimate of the material content of the station. The ac-

tual percentages vary in relation to the station configuration. The power supply is not includ-

ed in the percentage of weights since the end-of -life value is dependent on the model of

supply used in the station.

Most of the Material categories are self explanatory. Copper bearing materials:

•

include any material that contains copper.

•

primarily consist of circuit boards.

•

exclude cables (separate Material category).

Beryllium Oxide has been used in the power amplifier. Beryllium Oxide should not be sub-

jected to any process which will generate dust.

Over 92% of the station is made of aluminum, one of the most recycled materials commonly

available today. In addition, the aluminum used in the station consists of 90-95% recycled

content.

Plastic use has been minimized since the market for recycled engineering plastics is limited.

The plastic which has been used for the front panel is a relatively clean and pure resin.

68P81096E25-G

Material

Aluminum

Steel

Copper Bearing

Cable

Polycarbonate

% by weight

92%

Table of Contents