Installing Vivopay Vp8300 - ID Tech VP8300 User Manual

ViVOpay VP8300 UserManual

1.3 Installing ViVOpay VP8300

This section describes how to install the ViVOpay VP8300 on a Desktop.
Launch the USDK and get into the main
screen, USDK will detect the VP8300
automatically(Share same tool with
VP3300).
When VP8300 is standby, the far left
LED will flash.
Contactless transaction:
Select "CTLS"->"Transaction"->"Start
CTLS Trans" to start a contactless
transaction.
When VP8300 is ready to tap card, the
first Green LED will be solid.
Tap the card on VP8300, if reading card
success, all four LEDs will blink once
with one long beep; if reading card
failure, only two short beeps be
sounded.
3