Channel Tab - Psion Teklogix Hand-Held Computer 7530 G2 User Manual

Default All Parameters
• Tap on the Default all Parameters button to return all registry parameters
to default values.
When this button is pressed, a screen appears asking if you're sure you want to
return all parameters to their default values.
• Tap on the Yes button to return values to their default settings.
Note: This button does not default the radio parameters set under the Radio tab.

5.10.2 Channel Tab

Channel Number
This parameter determines the operating radio channel of the 7530 G2. The
allowable range for this parameter is
Note: The Channel Number dropdown menu displays only the channels that
have been enabled in the Channel Enable List.
Power Up Channel
When this parameter is enabled (checked), the 7530 G2 begins communicating on
the channel specified in the Channel Number parameter when the unit is powered
up. This setting may prevent the migration of 7530 G2s to the same channel due to
uneven coverage in some sites.
If this parameter is disabled (unchecked), the unit will continue communicating on
the same channel that it was on before it was powered off.
to . The default value is
1 20
Psion Teklogix 7530 G2 Hand-Held Computer User Manual
Chapter 5: Configuration

Channel Tab

.
1
135