Selecting The Caller Id Method; Adjusting The Date And Time; Changing The Date; Changing The Time - Avaya B159 Series User Manual

7.7 Selecting the Caller ID Method

The phone needs to be configured to match the caller ID signalling method used in your country or region. The table
below is a guideline for choosing the correct setting. If the caller ID is not working properly, select another setting or
contact your telephone service provider for further information.
To set the phone's call ID setting:
1. Select > SETTINGS > CALLER ID.
2. Select your choice.
Caller ID Standard
Bellcore (Telcordia)
ETSI
BT (British Telecom)
DTMF
3. Press OK to confirm.

7.8 Adjusting the Date and Time

7.8.1 Changing the Date

1. Select > SETTINGS > TIME DATE > DATE.
2. Change the flashing figures for the year using the arrow buttons or by entering the figures on the keypad.
3. Press OK to confirm and to continue to the month, and then proceed in the same way for the day.

7.8.2 Changing the Time

1. Select > SETTINGS > TIME DATE > TIME.
2. Change the flashing figures for the hour using the arrow buttons or by entering the figures on the keypad. Press
OK to confirm and to continue to minutes.

7.8.3 Changing the Time Format

1. Select > SETTINGS > TIME DATE > TIME FORMAT.
2. Select either a 12-hour or a 24-hour format using the arrow buttons and press OK to confirm your choice.
B159 Series User Guide
IP Office™ Platform 10.0
Country
Canada (usually), USA, Australia, New Zealand, China, Hong Kong, Singapore.
Austria, Belgium, Czech Republic, France, Germany, Italy, Luxemburg, Norway,
Poland, Spain, Slovenia, Switzerland, Turkey, South Africa, Taiwan.
United Kingdom
Denmark, Finland, Greece, Iceland, Netherlands, Portugal, Sweden, China, India,
Saudi Arabia, Brazil, Uruguay.
Comments on this document? infodev@avaya.com
Settings: Adjusting the Flash/Recall Pulse
Issue 02a (06 November 2017)
Page 39