3.12 Calls via DECT and Mobile Phones
For these instructions, it is assumed that the conference phone is connected to a DECT or mobile telephone via a cable
(optional accessory). Hereafter, both types of telephone are referred to as mobile phones.
3.12.1 Select Mobile as the Telephone Line
To select a mobile as the telephone line:
1. Press
and use the arrow buttons to select MOBILE as a phone line. Press OK to confirm.
2. If you select MOBILE+USB as the line mode in the conference phone, you will be able to
call connected via the computer
3.12.2 Making Calls Using a Mobile Phone
To make call using a mobile phone:
1. Press
and dial the number on the mobile phone as you normally would.
2. The conference phone now functions as a speaker and microphone for the mobile phone. The LEDs show a steady
blue light.
3.12.3 Ending Calls
To end a call:
1. Ending the call on the mobile phone.
2. Press
to turn off the conference phone.
B159 Series User Guide
IP Office™ Platform 10.0
.
21
Comments on this document? infodev@avaya.com
combine the call with a
Page 22
Issue 02a (06 November 2017)