Xerox 530 System Management Reference Manual page 22

Table 5. Nonresident RBM Modules (cont.)
Group Function Ident Size
t
Control Task Subtasks (cont.) S:KEY5 75
S:KEY6 76
S:PMD OE
S:PMD1 11
S:CCI, S:ATTN OF
S:PARPWR FF
Job Control Processor Process control commands 10
Debug Debug 20-2F
Device-Dependent I/o Editing
KP and PT pre-I/O and post-I/O editing 30
and Error RecQvery (Models 4191,4193,7012,7020,7060,
8091, and 8092).
MT error recovery (Models 7315/16,
31
7322/23, 7332/33, 7362/72).
C P error recovery (Moed I 7160). 32
C P error recovery (Model 7165).
33
CR error recovery (Models 7120, 7121 35
7122, and 7140).
CR and 7tk MT post-I/O BCD conversion 36 250
(Models 7120, 7121, 7122, 7140, 7362,
and 7372).
CP and 7tk MT pre-I/O and post-I/O
37
160
BCD conversion (Models 7165, 7362,
and 7372).
C P pre-
1/ a
and post-
V
a
38 250
BCD conversion (Model 7160).
LP pre-I/O editing (Models 3451, 7440, 3A 175
7441 and 7445).
LP pre-I/O editing (Models 3461/62/63/64/ 3B 140
65/66 and 7446).
LP pre-I/O editing (Model 7450). 3C
200
LP error recovery (All Models).
3D
LD pre- I/O and error recovery
3E 310
MT error recovery (Models 3325/35)
3F 467
HEXDUMP Memory/RAD dump
40
Hexadecimal patching 41
I/O table dump
42
Misce lIaneous I/O message writer
12
RBM bootstrap AC
t A size is indicated for the optionally resident functions only.
16 Optional Foreground Facilities