Adjusting Links; Moving Links; Deleting Links - PSC PT Program Generator User Manual

Psc pt program generator user's manual

Table of Contents

Creating & Using Nodes

To draw a

node, move the pointer to where you want the first joint to be, click the mouse

again, and draw the next leg of the Link. Click inside a frame or node to com-

plete the Link.

Adjusting Links

To adjust an existing Link, move the arrow pointer to the Link's arrowhead or

joint, and hold down the left mouse button. Drag the joint or arrowhead to a

new position, and then release the mouse button.

If two or more Links overlap, you can select them separately by moving the

arrow pointer to a joint or arrowhead and holding down the left mouse but-

ton. The selected Link appears dashed. To select the next Link in the stack,

press and hold down the left button again.

To move a node while retaining the position of its anchored, jointed links,

press and hold the

and moving it to the new location.

To delete an existing Link, select the Link by moving the cursor to the Link's

arrow-head and holding down the left mouse button. Press the

or the

(a Link with one or more bends), point to the source

jointed Link

and

Shift

button.

ESC

keys while grasping the node with the mouse

Ctrl

PT Program Generator (PPG) v5.0

button

Delete

Table of Contents

Do you have a question about the PT Program Generator and is the answer not in the manual?