Logging Tab; Sending And Receiving Data - PSC PT Program Generator User Manual

PT40 Communication

Logging Tab

Select the
communications log can be helpful as a trouble-shooting aid.
Figure 67. Logging Tab of the File Transfer Utility
Log To File
Log To Screen
Append to Log
Log Path/
Filename
Browse
Select

Sending and Receiving Data

Verify that the portable is properly attached to the host PC. If the portable
uses a dock, make sure that the dock is properly attached to the PC.
Refer to
Receive Files on page 98
96
tab to establish settings for the communications log. The
Logging
Specifies that the log is to be written to a text file.
Specifies that the log is displayed on screen.
This option becomes available when you select
enabled,
Append to Log
file. If not enabled, new log information replaces the previous log file.
Specify the location for storing the communications log. If a path is not
given, the file is stored in the
Use the
Browse
to save the settings and close the setup functions.
OK
, below for specifics on sending files. Refer to
Transmit (Send) Files
for specifics on receiving files.
adds log information to the end of the log
Default File Transfer
button to locate a new log file.
PT Program Generator (PPG) v5.0
. When
Log to File
folder.