Store Index Tab; Next Nodes; Copy Nodes - PSC PT Program Generator User Manual

Creating & Using Nodes
Ignore Case

Store Index Tab

Figure 42. Store Index Tab
The
record in the file that passes the verification. If there is no match, it stores the
position of the last record. Select a register name from the list. This option is
only available when the

Next Nodes

Next node
ceeds or fails.

Copy Nodes

Copy
often stored temporarily in a register until it is validated. Then a
transfers the data into a file. A
file to a register, where it can be referenced or displayed. You can also use a
Copy
files and between registers.
Figure 43 on page 67
66
None Requires no match; it tests only on the basis of type.
Constant Compares the value in the data source to a constant value
Range Verifies that the value in the data source falls between an upper
and a lower value
Register name Verifies that the value in the data source matches the value in a
specified register (refer to
specifying a register location.)
Ignore Case
If you want the data to be case specific, make sure this option is
not selected.
Store Index In Register
Verify Source
specifies the next operation to go to when the verify function suc-
nodes are used to move data between registers and files. Collected data is
node to copy a constant value to a register or file or to copy data between
shows the dialog box associated with a
Registers on page
verifies the data match regardless of capitalization.
option stores in a register the number of the first
option is set to
node can also copy data from a portable
Copy
PT Program Generator (PPG) v5.0
78, for details on
.
File
node
Copy
node.
Copy