The Output: Error Beep Node; The Display: Error Text Node - PSC PT Program Generator User Manual

The Output: Error Beep Node

Now you need to set the
ing steps:
Figure 91. The Output: Error Beep Dialog Box

The Display: Error Text Node

You can have a special message appear when the error beep is sounded.
Double-click on the
and press
Figure 92. The Display: Error Text Dialog Box
User's Guide
Output
1. Double-click the
2. On the
Information to Output
setting and Constant as the
In the constant field, enter the characters .+ (period and plus).
•
This is the command to sound a high beep.
Or enter .– to sound a low beep.)
•
3. Press to save your settings and exit the dialog box.
OK
Display: Error Text
.
OK
Building a Custom Portable Program
node to sound a beep. Complete the follow-
node to display its dialog box.
Output: Error Beep
tab, select System as the
Data Source
node, enter the text shown in
Output To
setting.
Figure 92
119
,