The Output: Error Beep Node; The Menu: Error Text Node - PSC PT Program Generator User Manual

Figure 96. The Output To: PC Dialog Box

The Output: Error Beep Node

Complete the following steps to set up this node:

The Menu: Error Text Node

Complete the following steps to set up this node:
User's Guide
3. From the
Data Source
pull-down list select Monthly Inventory.
4. On the
Next Nodes
field and Output Error Beep from the
Next Node
field.
5. Press to save your settings and exit the dialog box.
OK
1. Select the
Output: Error Beep
2. On the
Information to Output
setting and Constant as the
3. Enter .+ in the
Source
portable to sound a high beep.
4. On the
Next Nodes
5. Press to save your settings and exit the dialog box.
OK
1. Select the
Menu: Error Text
checkbox and select Output to PC from the
2. Enable the
<F3>
pull-down list to attempt a second output if the user presses
Building a Custom Portable Program
pull-down list, select File. From the
tab, select Display Successful from the
node to open its dialog box.
tab, select System as the
setting.
Source
pull-down list. This is the code which tells the
tab, select Menu Error Text for both fields.
node and enter the text shown in
File
On Error
Output To
.
Figure 97
.
<F3>
123