Specialized Download Situations; Using Xfer32; Xfer32 Setup - PSC PT Program Generator User Manual

PT40 Communication
3. The Falcon PT40 can hold up to four applications. Choose the location

Specialized Download Situations

If you are downloading a program file to several portables, or if you switch
between two or more programs in a portable, you can save time by download-
ing the program's compiled file, rather than recompiling the source file each
time.
To do so, launch the
PT Program Generator > PPGXFER
use the
Once you select the file, downloading begins immediately.

Using XFER32

XFER 32 is the application used to send and receive files to and from the
PDT. When you start
opens.
Figure 64. XFER32 User Interface

XFER32 Setup

To prepare for data transfer between the PC and the PDT, click on the
button to open the
92
where you want to load your new application.
• Once you select a location, your application is downloaded.
• If there was previously an application in the location you select,
that application will be removed and replaced with a new
application.
PPGXFER
command to select your previously compiled *.hex file.
File > Open
XFER32
dialog box, which contains three tabbed sections:
Setup
directly from Windows via
. Once you're in the
, the user interface, shown in
XFER32
PT Program Generator (PPG) v5.0
Start > Programs >
window,
PPGXFER
,
Figure 64
Setup