Ppgcomp Error Messages - PSC PT Program Generator User Manual

Unrecognized node type found

PPGComp Error Messages

Table 7. PPGComp Error Messages
Can't access PPGXFER
tool to download
application
Can't allocate scanner to
analyze source code
Error creating <file name>
Error finding character
Error locating bitmap file
Error opening <source file
name>
User's Guide
Error Message
Error Message
The PPGXfer application must be located in the same direc-
tory as PPGComp. If the PPGXfer (PPGXfer.exe) is missing,
reinstall PPG to restore all files.
These errors indicate that there is insufficient memory avail-
able to run PPGComp. Close other applications and try
again. If no other applications are open, you may need to
reboot your PC before trying again.
An error occurred while creating the file. The directory may
be write-protected or the drive may be full. Make sure there is
room for the file and you are able to create files in that loca-
tion.
The specified character's bitmap could not be found. Contact
PSC Technical Support for assistance.
The file containing bitmaps for the selected language cannot
be found. Reinstall PPG to restore all files. If the message
persists, you may be running an outdated version of PPG-
Comp. Contact PSC Technical Support for assistance.
Error <source file name> is empty
Description
An unrecognized node type has been read. This
usually indicates that the
corrupted. Contact Technical Support for assis-
tance.
Description
Error Messages
.scr
file has been
175