Electrical Connection U.k - Miele WCI 660 WCS Operating Instructions Manual

Electrical connection U.K.

All electrical work should be carried out
by a suitably qualified and competent
person, in strict accordance with cur-
rent national and local safety regula-
tions (BS 7671 in the UK).
Ensure power is not supplied to the ap-
pliance until after installation work has
been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for con-
nection to a 230-240V mains supply.
Please ensure the connection data
quoted on the data plate match the
household mains supply.
Connection should be made via a suit-
able switched socket which is easily ac-
cessible after installation.
For extra safety it is advisable to protect
the machine with a suitable residual
current device (RCD). Contact a quali-
fied electrician for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Installation and connection
Non-rewireable plugs BS 1363
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is em-
bossed in words on the base of the
plug (as applicable to the design of plug
fitted).
Replacement fuses should be ASTA ap-
proved to BS 1362 and have the correct
rating. Replacement fuses and fuse
covers may be purchased from your
local electrical supplier.
WARNING: THIS APPLIANCE MUST
BE EARTHED
85