Sample Equipment Configuration Window On A Psax 1000 System - Lucent Technologies PacketStar PSAX 8-Port Voice 2-Wire Station Module User Manual

Chapter 3 Configuring Ports and Channels Using the Console Interface
Obtaining General Module Data and Accessing Ports and Channels
®
8-Port Voice 2-Wire Station Module User Guide, Issue 1
PacketStar
3-2
Accessing the Equipment Configuration Window
Begin
1 On the Console Interface Main Menu window, select the Equipment
Configuration option.
The Equipment Configuration window is displayed (see Figure 3-1
through Figure 3-5). The commands and fields on this window are
described in the tables following the figures.
2 View the module status, software version, PEC, and serial number data.
3 When you are ready to begin configuring the ports and channels of the
module, select the line displaying the name of the module you want to
configure.
Note: Proceed to the section, "Configuring the Ports," for module con-
figuration procedures.The sample Equipment Configuration win-
dows in the following figures may not show the actual module
you are configuring. These figures illustrate the variations of slot
configurations for the different PSAX chassis displayed on the
Equipment Configuration window.
End
Figure 3-1. Sample Equipment Configuration Window on a PSAX 1000 System
(Page 1)
Release 8.0.0
255-700-261