Module Description; Overview Of The 8-Port Voice 2-Wire Station Module; Voice 2-Wire Station Module - Lucent Technologies PacketStar PSAX 8-Port Voice 2-Wire Station Module User Manual

Overview of the 8-Port Voice 2-Wire Station Module

®
8-Port Voice 2-Wire Station Module User Guide, Issue 1
PacketStar
255-700-261
2
The 8-Port Voice 2-Wire Station module provides support for the station
(telephone set) end of a two-wire analog telephone line. A telephone or
other analog voice device can be connected directly to this module in the
Multiservice Media Gateway system over an ATM network. The coding
translation supported by this module is Mu Law to Mu Law only.
The module has three types of light emitting diode (LED) indicators: ACTIVE,
FAIL, and LOS (loss of signal). On the faceplate, each port has a LOS LED
that illuminates when the port goes off-hook. It also flashes in synchroniza-
tion with an incoming ringing signal to the port.
Figure 2-1. Voice 2-Wire Station Module

Module Description

FAIL
ACTIVE
VO ICE
2W S
Release 8.0.0
2-1