System Responses To Selecting Options, Fields, Or Commands; Shortcut Keys For Navigating Console Interface Windows - Lucent Technologies PacketStar PSAX 8-Port Voice 2-Wire Station Module User Manual

Table 1-4. System Responses to Selecting Options, Fields, or Commands
For a selected...
option name
field
command
Table 1-5. Shortcut Keys for Navigating Console Interface Windows
If you want to...
redisplay the previous window
redisplay the Console Interface Main Menu
window
refresh the window
®
8-Port Voice 2-Wire Station Module User Guide, Issue 1
PacketStar
255-700-261
~ Press the Up, Down, Left, or Right Arrow to highlight (reverse video
image) the option name, field name, or command you want to select and
press Enter.
~ Use the alternate keys, K=UP, H=LEFT, L=RIGHT to highlight (reverse
video image) the option name, field name, or command you want to
select and press Enter. (You can optionally redefine these alternate keys
from the User Options window, which is accessible from the Console
Interface Main Menu window.)
~ To quickly select a command, you can also simultaneously press Ctrl and
the letter underlined in the command.
Once an option name, field, or command is selected, the system responds
as described in Table 1-4.
the following occurs:
The window corresponding to the option name is displayed.
The following variations occur:
• The field entry area is blank or contains the default or previously
entered value. Press Enter to enter or change data in this field. Press
Enter again to exit edit mode.
• The field entry area, like the field name, is displayed in reverse video
image and contains a predefined set of values, which you can view or
select by pressing Enter to navigate forward through these values. To
navigate backward through these field values, press Ctrl+H or the
Backspace key.
Read-only fields, which you cannot change, are enclosed in square brack-
ets (example: [LineStatus]).
The following variations occur:
• A message in the information line indicating an error or successful com-
pletion of the command is displayed.
• The next higher level or previous window (window name) is displayed.
• The next lower level or succeeding window (window name) is displayed.
• To navigate through the Console windows, use the shortcuts listed in
Table 1-5.
Chapter 1 Getting Started
General Document Navigational Guidelines
press...
Ctrl+B on the window.
Ctrl+G on the window.
Ctrl+R on the window.
Release 8.0.0
1-7