Use Of Field Description Tables; General Document Navigational Guidelines; Selecting Options, Fields And Commands Using The Console Interface; Command Description Table Example - Lucent Technologies PacketStar PSAX 8-Port Voice 2-Wire Station Module User Manual

Chapter 1 Getting Started

General Document Navigational Guidelines

Use of Field Description Tables

Identifies editable fields
or display-only fields on
screens
Table 1-3. Field Description Table Example
Field Name
Interface Type
Identifies available
range for field value
when applicable
General Document Navigational Guidelines

Selecting Options, Fields and Commands Using the Console Interface

®
8-Port Voice 2-Wire Station Module User Guide, Issue 1
PacketStar
1-6
or button functions displayed on the window. You are urged to read all the
information in the command description table, especially upon first use, as
commands may have special instructions or configuration constraints called
out in the Function column cells by use of the Note: text convention (see
Table 1-2).
Table 1-2. Command Description Table Example
Command
Bring All Interfaces
Into Service
Field description tables usually follow the command description tables. Field
description tables define the fields, their functions, configuration choices, and
constraints, if applicable. As in command description tables, the Note: text
convention is also used, where appropriate, in the field description tables to
alert the user to special instructions or configuration constraints (see
Table 1-3).
Identifies initial field
value default
Field Value
Default: 0
Range: 0–22
Format: Numeric
Identifies field value format as
Numeric, Predefined,
Hexadecimal, Alphanumeric
Follow these guidelines to select an option, field, or command on the PSAX
console interface windows and to navigate through the windows:
• To select an option, field, or command, do one of the following:
Brings the out-of-service configured interfaces to in-
service status.
Note: In GR-303 configuration, it is critical to bring
into service only those channels actively configured
with DS1 ports.
Describes the function of the field
and special instructions for
configuring modules
Description
The end-to-end connection protocol used.
For MD DS1 module configuration, select the X
value.
Note: DBCES is only available when channeliza-
tion and signalling are enabled on the X window.
Describes special instructions or
configuration constraints
Function
Release 8.0.0
255-700-261