System Configuration Switch
Figure 4-5 and Table 4-4 show and describe the use of the system configuration switch
(SW2). In the table, the switch status indicated in bold text is the default setting.
Figure 4-5: System configuration switch
Table 4-4: System Configuration Switch Settings
Switch
SW2-1
SW2-2
SW2-3
SW2-4
Front Panel Board Components
Figure 4-6 and Table 4-5 show and describe the components on the server's front panel
board. This board is linked to the system board through the front panel board connector
(CN26).
Figure 4-6: Front panel board components
HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide
All manuals and user guides at all-guides.com
Status
Function
On
Boot block enabled
Off
Normal boot
On
Clear CMOS settings and restore system defaults
Normal CMOS settings
Off
—
Reserved
—
Reserved
Connectors, Switches, and LEDs
4-7