Table of Contents
Advertisement
5.5 Output specification
Item
Signal name
Circuit isolation
Operation indication
External power sup-
ply
Load current
Open circuit leak cur-
rent
Output ON voltage
Response time
Turning ON rate of
I/O simultaneously
「电器电子产品有害物质限制使用标识要求」的表示方式
Note: This symbol mark is for China only.
含有有害6物质的名称， 含有量， 含有部品
本产品中所含有的有害 6 物质的名称， 含有量， 含有部品如下表所示。
部件名称
外壳
可编程控制器
印刷基板
本表格依据SJ/T 11364的规定编制。
○:表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572规定的限量要求以下。
×:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。
This manual confers no industrial property rights or any rights of any other kind, nor does it
confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any
problems involving industrial property rights which may occur as a result of using the contents
noted in this manual.
Warranty
Exclusion of loss in opportunity and secondary loss from warranty liability
Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:
(1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
(2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
(3) Special damages and secondary damages whether foreseeable or not, compensation for
accidents, and compensation for damages to products other than Mitsubishi products.
(4) Replacement by the user, maintenance of on-site equipment, start-up test run and other tasks.
This product has been manufactured as a general-purpose part for general industries, and has
not been designed or manufactured to be incorporated in a device or system used in purposes
related to human life.
Before using the product for special purposes such as nuclear power, electric power,
aerospace, medicine or passenger movement vehicles, consult with Mitsubishi Electric.
This product has been manufactured under strict quality control. However when installing the
product where major accidents or losses could occur if the product fails, install appropriate
backup or failsafe functions in the system.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
JY992D77601K
General-purpose output
Y00 to Y07
By photocoupler
LED is lit while output is ON
5 to 24V DC ± 10%
50mA or less
0.1mA/24V DC or less
0.5V max
0.2ms max. for both OFF → ON and
ON → OFF.
50% or less
产品中有害物质的名称及含量
铅
汞
(Pb)
(Hg)
○
○
×
○
Manual number : JY992D77601
Manual revision : K
Date
FP, RP , CLR
By photocoupler
LED is lit while output is ON
5 to 24V DC ± 10%
20mA or less
0.1mA/24V DC or less
0.5V max (CLR is 1.5V max.)
Pulse output FP RP is 200kHz max.
Pulse output width of the CLR signal:
Approx. 20msec.
有害物质
镉
六价铬
(Cr(VI))
(Cd)
○
○
○
○
For safe use
: January 2018
Specifications are subject to change without notice.
Output to drive unit
多溴联苯
多溴二苯醚
(PBB)
(PBDE)
○
○
Effective January 2018
○
○
Advertisement
Table of Contents
