Maintenance; Daily Maintenance - AccuTemp Vision Touch Operator's Manual

User's manual | Vision™ Touch Combi Steamers I 08 MAINTENANCE
08 I MAINTENANCE
GENERAL INSTRUCTIONS
The combi steamer must be kept clean, and remains of grease and food
must be removed. Not following the maintenance instructions will void the
warranty.
Only regular maintenance and adherence to all instructions will ensure the
combi steamer's long life and cooking quality and guarantee trouble-free
operation.
For safe, trouble-free operation, the combi steamer and its accessories
must be inspected by an authorized service at least once per year.
Before starting any maintenance or repair works, thoroughly
•
reacquaint yourself with
recommendations in chapter SAFETY.
The warranty does not cover damage caused by unprofessional
•
cleaning and maintenance.
During the entire time of operation, the appliance must be subject
•
to regular checks, inspections and tests according to applicable
national regulations on operating this type of equipment.
The user must not rearrange any elements set by the manufacturer
•
or authorized service technician.
When opening the door, especially during steam operations, stand
•
in such a way that you cannot be scalded by the steam escaping from
the open door. Open the door only partially and open fully only once
the steam has escaped.
Do not spray water from the shower on the door's glass and lights, if
•
the internal temperature is above 200 °F — this may break the glass.
Before turning on the appliance, always check to see that the water
•
valve is open. Once work is over, close the appliance's water valve!
all instructions, restrictions

8.1 DAILY MAINTENANCE

The combi steamer must be cleaned daily with AccuTemp Products Inc.
recommended cleaning agents. If the combi steamer is not cleaned
adequately, grease on the chamber walls and can catch fire at high
temperatures. Damage caused by failure to follow these instructions is not
covered by the warranty!
CLEANING THE COOKING CHAMBER
For everyday cleaning of the combi steamer, use one of the five programs
in the Cleaning function, which you fill find in the combi steamer menu.
When cleaning, use only the cleaning agents recommended by AccuTemp.
When the combi steamer is being cleaned with a cleaner, its temperature
must under no circumstances exceed 150 °F. At higher temperatures, the
cleaner may bake on to the surface of the cooking chamber and form stains
resembling rust. The warranty does not apply to burnt-on cleaning agent.
and
After cleaning the cooking chamber, leave the door ajar.
When washing the combi oven, always use safety gear and prescribed
•
work clothing (gloves, goggles, mask)! Protect your health!
When working with a cleaning agent always take great care to follow
•
the recommendations in this manual. This will prevent hazards to
your health!
If the combi oven is not cleaned adequately, grease builds on the
•
chamber walls and can catch fire at high temperatures. Damage
caused in this way voids the warranty!
After finishing manual washing, always use the spray hose to
•
thoroughly rinse the cleaner from inside the cooking chamber. If
this isn't done, the stainless-steel surface of the cooking chamber
can distort and discolor when the appliance is used at high
temperatures. The warranty does not cover damage caused in this
way!
When the washing program has finished, check that the selected
•
washing program was sufficient. If not, repeat the wash. The
warranty does not cover damages caused by insufficient washing!
Never clean the combi oven using acid or leave acid near the
•
appliance — this can damage the stainless-steel surface!
Do not use coarse or sand-based cleaning agents.
•
Do not use objects for mechanical surface cleaning (wire brushes,
•
scrapers, knives).
Do not clean the combi oven using equipment that works with high
•
water pressure.
The warranty does not cover damages arising as a result of using
•
cleaners other than those recommended by the manufacturer, or as
a result of using the cleaners recommended by the manufacturer in
contradiction to the recommendations of the manufacturer!
CLEANING THE DOOR SEAL
If the door seal is soiled or greasy, clean it or remove it without using a tool
(start at the corners) and wash it in water with cleaner. Once the seals are
dry, reinstall them without using a tool (again, start at the corners). After
washing, leave the appliance's door ajar so that the cooking chamber can
air out. This also makes the door seals last longer.
28