Table of Contents
Advertisement
User's manual | Vision™ Touch Combi Steamers | 07 AUTOMATIC WASHING
07 I AUTOMATIC WASHING
The Vision™ Touch combi steamer is equipped with an automatic cleaning
system, which ensures that the combi steamer will always be perfectly
hygienically clean.
Regular use of this automatic cleaning system saves you time and
significantly prolongs the life of the appliance.
Thanks to this system, the only cleaning tasks on this appliance are:
choosing the right cleaning program for the level of soiling
•
starting the cleaning program and adding cleaner.
•
6.1 BASIC INFORMATION AND WARNINGS
For automatic cleaning, you must use the AccuTemp Active Cleaner cleaner,
which is packed in 100 gallon plastic bags. It is delivered in small buckets
containing 40 packs.
The AccuTemp De-scaler is to be used once a month or as needed. It is
delivered in small buckets containing 25 packets.
The cleaner's package protects it from moisture damage, nevertheless it
should be stored in places where no water or excess humidity is present.
Always use the cleaner immediately after opening the package. Never
leave it open, and most importantly, do not leave it in damp places or
unsupervised.
Important information:
If a cleaner or de-scaler other than AccuTemp approved cleaning
•
detergent is used, AccuTemp takes no responsibility for any damage,
and the warranty does not apply to damage caused in this way.
Keep the cleaner or de-scaler out of the reach of children.
•
When handling the cleaner or de-scaler, follow all rules for working
•
safely with chemical substances, and especially use safety gear
(primarily gloves and protective glasses).
Follow the instructions on the cleaner or de-scaler package.
•
The cleaner or de-scaler must never come into direct contact with
•
the skin, eyes or mouth.
Never open the appliance's door when the cleaning program is
•
running – this can cause a chemical exposure hazard.
Also remove pans from the combi steamer before cleaning it.
•
Follow all instructions shown on the appliance's display.
•
After using the cleaner or de-scaler, do not leave the detergent
•
package in the cooking chamber.
Never spill the cleaner or de-scaler on the appliance's hot surface —
•
this can irreversibly damage the stainless steel surface. The warranty
does not apply to appliances damaged in this way.
If cleaning is inadequate, grease build-up in the appliance's cooking
•
chamber may ignite during ordinary operation.
•
The combi steamer has five washing programs.
PROGRAM
DESCRIPTION
Water rinsing - rinse off the cooking
chamber with lukewarm water without
cleaner
Express wash - Short washing of light
soiling.
Basic wash - Washing of light soiling.
Medium wash - Washing of medium level
soiling.
Extra strong wash - Washing of very heavy
soiling.
Cooking chamber descaling
Ca
* The washing times are for reference only and may differ slightly depending on the
size of the appliance.
NUMBER OF DETERGENT PACKS
CLEANING
623
PROGRAM
WATER
0
RINSING
EXPRESS
1
CLEANING
BASIC
1
CLEANING
MEDIUM
1
CLEANING
EXTRA STRONG
1
CLEANING
COOKING CHAMBER
1
DESCALING
7.2 STARTING THE WASHING
1
ENTER THE WASHING MODE
2
SELECT THE APPROPRIATE MODE
3
TO START THE WASHING PROGRAM,
PRESS
TO RETURN TO THE WASHING MODE
LIST, PRESS
When Start is pressed, the combi oven automatically checks that the
temperature inside the cooking chamber is not too high. If the temperature
is above 180 °F, the automatic process for cooling the cooking chamber
will begin. If the temperature does not exceed 180°F or cooking chamber
cooling has finished, your appliance will prompt you to add cleaner.
When handling the cleaner, follow all rules for working with
chemical substances!
DURATION*
00:17:15
00:32:45
00:49:25
01:14:35
01:47:45
01:15:24
611
1011
1221
2011
0
0
0
0
1
1
2
2
1
1
2
2
1
1
2
2
2
2
3
3
1
1
2
2
2021
0
3
4
4
5
3
26
Advertisement
Table of Contents
