Table of Contents
Advertisement
User's manual | Vision™ Touch Combi Steamers | 05 EXTRAS | 5.1 RACK TIMING
05 I EXTRAS
The EXTRAS function category (button A10) contains several cooking
functions that you can use for special cooking methods, unusual procedures
and/or you may use the to make work with the combi oven faster and easier.
5.1.1 Cooking in the Rack timing mode
1
ENTER EXTRAS
2
PRESS
3
SELECT A COOKING MODE
4
BASED ON THE SELECTED COOKING MODE, SELECT:
4.1
Humidity amount (
4/4.1, point B2
4.2
Exhaust valve opening level (
convection mode
5
SELECT A DEFAULT TEMPERATURE FOR THE COOKING
CHAMBER
6
SELECT A DEFAULT SETTING FOR THE FAN
(
)
4/4.1, point B6
7
PRESS
7.1
OPTION: COOKING ACCORDING TO THE SET TIME
Set the time in the order Hours:Minutes:Seconds
Cooking will stop when the set time is reached.
7.2
OPTION: COOKING ACCORDING TO THE TEMPERATURE PROBE
Cooking will stop when the set temperature is reached.
Press
8
ENTER THE NAME OF THE TIMER
Press
8.1
OPTION: ADDING A TIMER
To add another timer, repeat the procedure from point 7-8
8.2
OPTION: DELETE A TIMER
Press the timer that you wish to delete
Select option
9
PRESS
) only in Combi mode
) in the case of the
4/4.1, point B3
5.1 RACK TIMING
The rack timing function enables one to assign different times to the
individual racks in the same cooking mode (steam, hot air or combination).
Within the scope of rack timing, it is also possible to create timing programs
(
4.2/4.2.7), which you may save to the programs directory and call up at
any time without any further settings. You merely define the specific times
for the individual racks.
22
Advertisement
Table of Contents
