Bios-Specific Commands - Cisco C880 M5 Configuration Manual

2.3.3

BIOS-specific commands

F1 09 - Get BIOS POST State
This command provides information whether BIOS is in POST.
Request Data -
Response
Data
F1 15 - Get CPU Info
This command returns CPU-internal information. The iRMC gets this information from
the BIOS during the POST phase.
Request Data
Cisco C880 M5 Configuration Guide
B8
NetFnlLUN: OEM/Group
- F1 Cmd : Command Group BIOS
1:3 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
4 09 Command Specifier
- BC
- F1
1 Completion Code
2:4 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
5 [7:3] - reserved
[0] - BIOS POST State : 0 = BIOS is not in POST 1 = BIOS is in
POST
[1] - BIOS Video State:
0 = Video initialization is not yet
done 1 = Video initialization is done
[2] - Uncorrectable Error Indicators
State: 0 = Indicators are not yet
cleared
- B8 NetFnlLUN: OEM/Group
- F1 Cmd : Command Group BIOS
1:3 80 28 00
4 15
5 Socket Number (0-based) of the CPU
IANA-Enterprise-Number FTS, LS Byte first
Command Specifier
2.3 Supported IPMI OEM Commands
20