Cisco C880 M5 Configuration Manual page 18

01 1D - Get Power Off Inhibit
This command gets the value of the Power Off Inhibit flag.
For more information on the Power Off Inhibit flag, refer to the description
of "01 1C - Set Power Off Inhibit".
Request Data
Response Data
01 20 - Set Next Power On Time
This command switches on a system at the given time independent of the stored
On/Off times in the configuration space.
The command takes effect only once.
You cancel a Power On time previously set with a 01 20 command by specifying
the Power On time "0" in a subsequent 01 20 command.
Request Data
Cisco C880 M5 Configuration Guide
- B8 NetFn|LUN: OEM/Group
- 01 Cmd : Command Group Communication
1:3 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
4 1D Command specifier
- BC
- 01
1 Completion code
2:4 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
5 01 Response data length
6 Power Off Inhibit Flag: 0 no Inhibit, 1 Inhibit
- B8 NetFnlLUN: OEM/Group
- 01 Cmd : Command Group Communication
1:3 80 28 00 IANA-Enterprise-Number FTS, LS byte first
20 Command specifier
4
5 00 Object ID
6:7 00 00 Value ID
8 04 Data length
9:12 Time (LSB first)
2.3 Supported IPMI OEM Commands
18