Configuration Via Scripting - Cisco C880 M5 Configuration Manual

3.4

Configuration via scripting

The iRMC supports remote configuration and limited scripting via the /config URL in
the iRMC S5.
On the Baseboard Management Controller page of the iRMC web interface you can
save (export) the current iRMC configuration data in a configuration file (.pre).
As well, you can import (restore) iRMC configuration data from an existing
configuration file (.pre), i.e. load configuration data onto the iRMC.
To import an iRMC configuration, you can alternatively send the corresponding SCCI
command file to the /config URL of the iRMC via the HTTP POST operation.
You can import configuration files via the SCCI API using commands of the following
languages:
cURL
l
VB script
l
Python
l
For more information, refer to
Cisco C880 M5 Configuration Guide
"Configuration via scripting" on page
3.4 Configuration via scripting
58.
35