Cisco C880 M5 Configuration Manual page 27

F5 B0 - Set Identify LED
This command allows you to switch the Identify LED (blue) of the server on and off. In
addition, you can set and read the GPIOs that are directly connected to the Identify
LED.
You can also switch the Identify LED on and off using the Identify switch
on the server.
Request Data
Response Data
F5 B1 - Get Identify LED
This command returns information on the status of the Identify LED (blue) of the server.
Request Data
Response Data
Cisco C880 M5 Configuration Guide
B8
- NetFnlLUN: OEM/Group
- F5 Cmd : Command Group BMC
1:3 80 28 00 IANA-Enterprise-Number FTS, LS byte first
4 B0 Command specifier
5 Identify LED:
0: Identify LED off
1: Identify LED on
2: Identify LED blinking
- BC
- F5
1 Completion code
2:4 80 28 00 IANA-Enterprise-Number FTS, LS byte first
B8
- NetFnlLUN: OEM/Group
- F5 Cmd : Command Group BMC
1:3 80 28 00 IANA-Enterprise-Number FTS, LS byte first
4 B1 Command specifier
- BC
- F5
1 Completion code
2:4 80 28 00 IANA-Enterprise-Number FTS, LS byte first
5 State of Identify LED:
0: Identify LED off
1: Identify LED on
2: Identify LED blinking
2.3 Supported IPMI OEM Commands
27