Setting The Duration; Setting The End - Electrolux EOA5750AOX User Manual

12 www.electrolux.com
Clock function
00:00
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12" flashes.
1. Touch
2. Touch
3. Touch
4. Touch
The display shows the new time.
To change the time of day touch
again and again until

7.3 Setting the DURATION

1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
DURATION time.
4. Touch
starts automatically after 5 seconds.
5. Use
DURATION time.
6. Touch
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes.
time setting flash in the display. The
appliance deactivates.
7. Touch a sensor field to stop the
acoustic signal.
8. Turn off the appliance.

7.4 Setting the END

1. Set an oven function and
temperature.
COUNT UP TIMER To set the count up, which shows how long the appli‐
and 12:00.
or to set the hours.
.
or to set the minutes.
or .
starts to flash.
again and again until
or to set the minutes for
or the DURATION time
or to set the hours for
. The DURATION time
Application
ance operates. This function has no effect on the op‐
eration of the appliance. It is on immediately when
the oven starts to heat. The COUNT UP TIMER is
not activated if DURATION and END are set.
2. Touch
starts to flash.
3. Use
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field to stop the
acoustic signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
DURATION.
4. Touch
5. Use
DURATION.
6. Touch
the setting of the END function.
The display shows flashing
7. Use
minutes and then the hours.
and
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds for 2 minutes.
and the time setting flash in the
display. The appliance deactivates
automatically.
8. Touch a sensor field to stop the
acoustic signal.
again and again until
or to set the END and
to confirm. First you set the
again and again until
or to set the minutes for
.
or to set the hours for
, the appliance switches to
or to set the END and
to confirm. First you set the
and the
.