Mounting The Tricon Transmitter - Neptune TRICON E Installation And Maintenance Manual

Refer to Figure 2.6 for assistance with the following steps.
3
4
5
6
7
8
TRICON/E/E2/E3 TRANSMITTER INSTALLATION AND MAINTENANCE GUIDE
Figure 2.6 Mounting the TRICON Transmitter
Twist the register approximately
Position the TRICON transmitter on the meter and twist it clockwise until it locks into place.
Place the register mounting ring on top of the TRICON transmitter with the four rounded
grooves facing upward.
Align the notch in the base of the register mounting ring with the terminal cover of the TRICON
and snap the ring into place.
When properly oriented, the register mounting ring should sit flush on top of the
TRICON transmitter.
Position the register on top of the TRICON transmitter and register mounting ring, and twist it
clockwise until it locks into place.
Drive the new seal pins into the register base and TRICON base to secure the installation
and prevent tampering.
⁄ turn counter-clockwise and remove it from the meter.
1
4
2-6