Initial Settings - AvMap EKPV User Manual

by the Warning page. To move to the map
press the joystick (ENTER). The EKP V has
been conceived to be always ready to use
through a STANDBY functionality which can
be set by the user.
The user can set a time interval from a
minimum value of 5 min to a maximum of
120 min to enable the function in the EKP V
SYSTEM SETUP menu.
The user can put the EKP V manually in
STANDBY by pressing the PWR button
and release the PWR button before the
countdown. To turn off the unit completely
the user needs to keep the PWR button
pressed for more then 3 seconds
When the navigator is in STANDBY, pressing
PWR button it is possible to resume the unit
After 8 hours of inactivity the unit will power
off autonomously.
6 - User Manual
Aeronautical Navigator

2. Initial Settings

When you power on EKP V for the first time,
you need to choose some basic settings, in
order to start to use the device.
Language
When you power on the device, you need to
choose first the language.
The default language is English. If you want
to change language:
1. Scroll down the items until you will find the
preferred language (see sample image)
2. Push the joystick to select it.
Scroll down the list to select Continue and
push the joystick to go to the next page.
In the next page, you need to choose (see
AvMap EKPV