Changing The Needle. Lowering - Husqvarna Viking Victoria User Manual

Changing the needle
1. Loosen the screw in the needle
clamp.
2. Remove the needle.
3. Push up the new needle with the
flat side away
from you
until it
will go no further.
4. Tighten the screw po perlv.
Always use needles of system
130/705H.
Lowering the feed teeth
The feed teeth are lowered when
you turn the dial to the left to
Turn the dial to the right to
———
if
you wish to raise the feed teeth. The
feed teeth will come up
automatically when you begin to
sew.
The feed teeth are lowered when
sewing buttons and br free-hand
work.
By lowering the feed teeth
it
is
easier to get thick garments under
the presser foot. Do not forget to
raise the feed teeth before starting to
sew.
Userv Guide Vthtoria
'5