Sewing Hints - Husqvarna Viking Victoria User Manual

Sewing hints
Free arm
To facilitate sewing trouser legs and
sleeve hems use the free arm.
The free arm also allows you to
darn socks
(
freemotion darning foot
is an optional accessory). Consult
the Accessory Vsers Guide.
"Jeans hem"
\\ hen sewing o' er seams in extra
heavy fabric or a blue jeans hem,
the foot can tip as the machine
climbs over the seam. The needle
can hit the tipped foot and break. In
this case, use the clearance plate to
balance the height of the hem as
you sew.
Place the clearance plate behind the
foot as
you
approach the hem and
in front of the foot as you sew over
the hem thickness. Remove the
clearance plate before sewing in to
it.
Sewing on belt loops
se presser foot B and lower the
feed teeth. Fold in about 1 cm on
the short ends. Place the belt lo( )p
on the garment and under the
presser foot. Set a wide zigzag stitch.
Sew a hartack from the outer edge
to the center of the loop, move the
material and sew a new bartack.
Continue to sew along the entire
length of the loops short side.
User's Guide Victoria
35