Wyrestorm MX-0404-H2 v2 Quick Start Manual page 7

H2 Matrix Operation
Selecting an Input and Output
Using Front Panel Buttons
1. Press the Left or Right arrow to highlight the output in the
display. The source number will begin to flash slowly.
2. Press the Up or Down arrow to select the input number.
3. Press Enter
to the selected output.
Using the Handheld IR Remote
From Front Panel
1. Locate the output number in the list.
2. Press the Left arrow to select the previous input or the Right
arrow to select the next input. Continue until the desired content
appears on the display device for the chosen output.
Copyright © 2016 WyreStorm Technologies |
H2 Matrix Operation User Guide | 160330
wyrestorm.com
1 of 1
From Remote Zone
1. Locate the source number you wish to select.
2. Press the Left arrow next to the input number to select the desired
source..
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
User Guide
support@wyrestorm.com