Fujitsu D3320 PRIMERGY BX2560 M2 Reference Manual page 75

Figure 10: Recovery finished
– Remove the USB stick.
– Turn off the system.
– Remove the server blade from the system unit and remove the "Recovery"
(RCV) jumper.
– Install the server blade in the system unit.
– Turn on the system.
The system will be booted with the new BIOS revision.
– Check the settings in the BIOS setup utility. If necessary, reconfigure the
settings again.
BX2560 M2
D3320 - BIOS Setup Utility
Flash BIOS Update
75