P PPoE setup
【
】
Input the user name and password that ISP
reboot up your system. Then the DVR will build a network connection based on PPPoE. The IP address
will change into dynamic IP address after above operation is well done.
Operation
After PPPoE dialing successfully look up the IP address in the [IP address] and obtain the
:
current IP address. Then use this IP address to visit the DVR through user port.
N TP setup
【
】
The NTP server must be installed in the PC.
Host computer IP:Input the IP address installed NTP server.
Port:Default: 123. You can set the port according to NTP server.
Time zone:London GMT+0 Berlin GMT +1 Cairo GMT +2 Moscow GMT +3 New Delhi GMT
+5 Bangkok GMT +7 Hongkong Beijing GMT +8 Tokyo GMT +9
GMT-10 Alaska GMT-9 Pacific time GMT-8 American mountain time GMT-7 American mid time
Picture 4.18 NetService
Picture4.19 PPPOE
I nternet service provider
(
Picture 4.20 NTP
Page 42
p rovides. After saving it
)
Sydney GMT +10 Hawaii