Alarm Output; Abnormal; System Setup - G-Lenz Security GDS-86208 User Manual

Set method: refer to chapter 4.3.1. Motion detect
Note:"Advanced" button is the same as rightclick.

4.3.5 Alarm output

Refer to chapter 3.5.4.

4.3.6 Abnormal

Analysing and inspecting current software and hardware of the device: When some abnormal events
happen,the device will make a relative answer such as show message and buzzer.
E vent Type
【 】
E nable
【 】
S how message
【
B uzzer
【 】

4.4 System setup

Set the system parameters such as General,Encode,NetWork,NetService,GUI display,PTZ
config, RS232 and Tour setup.
Picture 4.12 Abnormal
selecting abnormity you want to inspect
Select it to make sure abnormal function workable
Automatically alarm cue dialog box come out of the main screen
】
Device will have two long nosie "di di" while alarm is happening
Page 37