G-Lenz Security GDS-86208 User Manual page 22

Step 2: click Cruise buttons, the write proper value into the Cruise Line and Preset Points blank
then click Add Preset Points button, complete setting (also can add and delete cruise line which has
been set up)
Step 3: repeat step1 and step2 , until set out all the preset designated cruise lines
Remove Preset
remove the preset points.
Remove Cruise Line
remove the cruise lines set
Cruise Button
2 T he Calls of Cruise between Points
）
In Picture 3.10, click Page Shift button, enter PTZ control menu as shown in Picture 3.12. Please
input the number of cruise in the value blank, then click Cruise between Points button, PTZ begins to
work on the cruise line. Click Stop button to stop cruise.
3 、 、 、 、 S can
PTZ also can work on the preset scan line repeatedly.
1 S can setup
）
Step1 I n Picture 3.10, click Setup button
：
Step2 C lick Scan button
：
Step3 C lick Start button, enter Picture3.10
：
Focus A perture
、
Step4 C lick End button to complete setup
：
： P lease input preset value in the blank, click Remove Preset button, then
： I nput the number of cruise line, click Remove Cruise Lines button, then
。
Picture 3.13 Cruise Between Points Settings
t he input proper value in the scan value blank;
，
D irection and so on. Click Setup button to go back Picture 3.14
、
e nter Picture 3.14
，
h ere you can set the following items: Zoom
，
C lick the right button of the mouse to exit.
。
Page 22
。
Preset Points Blank
Cruise Line Blank
；
；
，
、