G-Lenz Security GDS-86208 User Manual page 34

【 I nterval 】 O nly one alarm signal is turned on even there are several motion detect signals in the set
interval.
【 A larm output 】 Start the external equipment of corresponding linkage alarm when the motion detect
alarm is turned on.
【 D elay 】 D elay a few moments and stop when the alarm state is turned off. The range is 10~300
seconds.
R ecord channel
【 】
signal when the alarm is turned on.
Note:Set in the [recording setup] and perform the linkage recording. Start detecting video files
in the corresponding time section.
■ means that the selective channel is single window alternate patrol preview. The interval is
T our
【 】
set in the [MainMenu]>[System] > [Tour].
S napshot C hoose record channels,when alarm happens,system triggers related channels for
【 】
snapshot signal.
Note:For Snapshot
MainMenu->Record->Record config,
P TZ Activation S et the PTZ activation when the alarm is turned on.
【 】
Note:PTZ activation is set in the [shortcut menu] >[ PTZ control]. Set the patrol between spots,
trail patrol and so on.
Picture 4.6 set the time section
C hoose the recording channel (multiple option supportive). Trigger the video
activation,pls go to set period,detect
Page 34
and alarm enable at