Snapshot Storage - G-Lenz Security GDS-86208 User Manual

channel in any state.
P eriod S et the time section of common recording, The recording will start only in the set range.
【 】
【 R ecord type 】
Regular:Perform the regular recording in the set time section. The video file type is "R".
Detect:Trigger the "motion detect", "camera mask" or "video loss" signal. When above
Alarm:Trigger the external alarm signal in the set time section. When above alarm is set as
Note
： ： ： ：

4.2.2 Snapshot Storage

Setup snapshot parameters for different channels.At first time it's set for 24hours snapshot continuously,
pls go to Main Menu->Record->Snapshot Storage for appropriate settings.
Note:If normal snapshot storage,pls setup Snap at Main Menu->Advanced->Snapshot(pls refer
to chapter 4.5.1 HDD Manage)
C hannel S elect the related channel to set,click "all" to set all channels.
【 】
P resnap S etup presnap picture quantity before recording,default is 5 pieces.
【 】
R ecord S et record status,"Schedule","Manual" and "Stop"
【 】
S et recording type: regular, detection or alarm.
alarm is set as opening recording, the "detection recording" state is on. The video
file type is "M".
opening recording, the "detection recording" state is on. The video file type is "A".
R efer to chapter 4.3 to set corresponding alarm function.
Picture 4.2
Page 30