Alarm Output; Ptz Control - G-Lenz Security GDS-86208 User Manual

【 S top 】 C lick the stop button and the according channel stops recording no matter the channel in
any state.

3.5.4 Alarm output

Please check current channel status: "○" means it is not in alarming status, "●" means it is in
alarming status.
You can use desktop shortcut menu or click [main menu]> [alarm function]> [alarm output] to
enter the alarm output interface.
C onfiguration
【 】
M anual C lick the all button and the according channel is alarming no matter the channel in any
【 】
state.
S top Click the stop button and the according channel stops alarming no matter the channel in any
【 】
state.

3.5.5 PTZ control

Operation interface is as followed. The functions include: PTZ direction control, step, zoom, focus,
iris, setup operation, patrol between spots, trail patrol, boundary scan, assistant switch, light switch,
level rotation and so on.
Note1. Decoder A(B)line connects with DVR A(B)line. The connection is right.
2. Click [main menu] >[system configuration] >[PTZ setup] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.
Picture 3.9 alarm output
A larm is on according to the configuration.
Page 19