【
N et Card
】
Y ou can choose cable network card or wireless network card.
D HCP Enable
【
】
Note
: : : :
D HCP server is preinstalled.
I P address
S et the IP address. Default: 192.168.1.10.
【
】
【
S ubnet mask
】
G ateway
S et the default gateway. Default: 192.168.1.1.
【
】
【
D NS setup
】
D omain Name Server. It translates the domain name into IP address. The IP address
is offered by network provider. The address must be set and reboot then it works.
T CP port
D efault: 34567.
【
】
H TTP port
D efault: 80.
【
】
H S Download
【
T ransfer Policy
【
precedence. The code stream will adjust according to the setup. Self-adaption is the
tradeoff between the image quality precedence and fluency precedence. Fluency
precedence and self-adaption are valid only when the assistant code stream is turned on.
Otherwise image quality precedence is valid.
4.4.4 NetService
Choose the network service option and click the set button to configure the advanced network
functions or double click the service button to configure the parameters.
O btain IP address automatically(not suggested)
S et the subnet mask code. Default: 255.255.255.0.
】
T here are three strategies: self-adaption, image quality precedence and fluency
】
Page 41