Assembling The Unit - Stihl FCB-KM Instruction Manual

Assembling the Unit

Pull the protective caps off of the
N
ends of the shaft and keep them in a
safe place for later use – see
"Storing the Machine"
Connecting drive tube to gearbox
1
2
Loosen the clamping screw (1) on
N
the gearbox – do not remove
Insert curved end of drive tube (3) in
N
the gearbox (2), turn the gearbox
back and forth as necessary.
Push the shaft (3) in as far as it will
N
go.
Screw in the clamping screw (1) as
N
far as it will go – do not tighten yet!
FCB-KM
2
4
Align the gearbox (2) on the shaft so
N
that the rib (4) is in line with the
shaft.
Tighten the clamping screw firmly.
N
Mounting the KombiTool
2
1
Push the lug (1) on the drive tube
N
into the slot (2) in the coupling
sleeve as far as stop.
3
4
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
Tighten down the star knob (4)
N
firmly.
Removing the KombiTool
Reverse the above sequence to
N
remove the drive tube.
English
9