Assembling The Lawn Mower - Stihl RMA 248.3 T Instruction Manual

Hide thumbs Also See for RMA 248.3 T:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 32

7 Assembling the Lawn Mower

► Plug the mains plug (6) into an easily accessi‐
ble socket (7).
The charger (3) will run a self-test. The
LED (4) will glow green for about 1 second
and red for about 1 second.
► Routing the connecting cord (5).
► Insert the battery (2) in the guides in the
charger (3) and press it home as far as stop.
The LED (4) glows green. The LEDs (1) glow
green and the battery (2) is being charged.
► When the LED (4) and the LEDs (1) on the
battery stop glowing: The battery (2) is fully
charged and can be taken out of the charger
(3)
► If the charger (3) is no longer required. Dis‐
connect the mains plug (6) from the wall outlet
(7).
6.3
State of Charge
1
► Press the button (1).
The LEDs (5) glow green for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.4
LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
19.1.
There is a malfunction in the mower or battery.
6.5
LED on Charger
The LED indicates the operating status of the
charger.
If the LED glows green, the battery is being
charged.
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.
0478-131-9605-B
7
7.1
7.1.1
► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
► Press pins (3) through openings (4) from the
80-100%
inside.
60-80%
40-60%
► Press upper part of grass catcher box (1)
20-40%
downwards.
The upper part of the grass catcher box
engages with a click.
0-20%
7.1.2
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► If the extension is attached: detach the exten‐
sion.
► If the mulch insert is inserted: remove the
mulch insert.
► Open discharge flap (1) and hold it open.
► Take hold of grass catcher box (2) by han‐
dle (3) and attach to mounts (5) from above
using hooks (4).
► Set down discharge flap (1) on grass catcher
box (2).
7.1.3
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
Assembling the Lawn
Mower
Assembling, Attaching and
Detaching the Grass Catcher
Box
Assembling the Grass Catcher Box
Attaching the Grass Catcher Box
Detaching the Grass Catcher Box
English
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rma 253.3 t

Table of Contents