Deleting Custom Volumes (Volume To Space) - HP StorageWorks XP128 User Manual

15.Verify that the information in the Install CV confirmation dialog box is correct, and click OK. The
Customized Volume screen is displayed with the new settings in blue.
Figure 42 Customized volume screen
16.Click Apply. a confirmation message appears.
17. Click OK. The custom volume is created. A dialog box appears when the requested action is complete.
18.Click OK.

Deleting custom volumes (Volume to Space)

To delete a custom volume from a VDEV, convert the custom volume into free space with the Volume to
Space function (see
Creating initial custom volumes for OPEN-V (Make Volume)
Use the Make Volume function to clear all custom volumes under a VSC volume and create an initial
volume (VDEV) that consists of new user-defined custom volumes.
CAUTION: The Make Volume function is a destructive operation and destroys the data on selected custom
volumes. Back up the data as needed before performing this operation.
1. From the Customized Volume pane, click the LDEV folder in the Parity Group - LDEV tree to open a list
of CUs, and then select a VDEV. The Parity Group - LDEV table displays information of LDEVs in the
selected VDEV.
NOTE:
the Make Volume function (see
Make Volume function. Remove all invalid custom volumes before performing the Make Volume
function.
"Converting volumes to space (Volume to
If the selected VDEV contains one or more custom volumes that violates any restriction for
"Volume to Space
LUN Configuration and Security Manager XP user guide for the XP128/XP1024
Space)" on page 71).
operation" on page 60), you cannot perform the
79