Lun Manager Operations - HP StorageWorks XP128 User Manual

For more information about port authentication settings, see
performing mutual
operating system and iSCSI driver documentation.

LUN Manager operations

This section includes procedures for performing the most common LUN Manager operations.
Starting LUN Manager
1. Click LUN Manager in the left pane. The LUN Manager pane appears.
S
Figure 10 LUN Manager main pane
LUN Manager main pane
The LUN Manager main pane contains the tabs listed in
Table 4 LUN Manager tabs
Tab
LUN Manager
Port
User Authentication
LU Path tree
The LU Path tree on the upper left of the LUN Manager tab lists the Fibre Channel and NAS ports in the
disk array and hosts connected to them. Hosts are identified by nicknames and WWNs and are classified
by host groups.
The LU Path tree may contain different folders: Fibre Channel, NAS, iSCSI, and so on.
28 LUN Manager for the XP128/XP1024
authentication)" on page 52. For details on how to configure a host, refer to your
Use this tab to...
Define LU paths and apply LUN security for logical volumes.
Configure ports by setting the topology and port addresses
Operations" on page
Enable or disable authentication settings and register user information on hosts
and ports ("User Authentication tab" on page
"Specifying user information of ports (when
Table 4.
44).
49).
("Starting Port