Iscsi Folder - HP StorageWorks XP128 User Manual

When you double-click a NAS port, the following host groups appear:
• NAS-Sys
• If you select NAS-Sys, the table on the right displays information about paths to system LUs. The
table contents are dimmed and cannot be changed.
• This host group number is 00.
• User
• If you select User, the table on the right displays information about paths to user LUs.
• This host group number is 01.

iSCSI folder

Figure 12 iSCSI folder in LU path tree
When you double-click the iSCSI folder, iSCSI ports in the disk array appear as icons. The port name and
port attribute appear to the right of each icon.
NOTE:
• The iSCSI folder is available if the disk array has an iSCSI channel adapter
• iSCSI ports always have the Target attribute
The following iSCSI port icons are used in the LU Path tree:
Table 7 iSCSI port icons for LUN Manager operations
Icon Meaning
LUN security is not applied to the port.
LUN security is applied to the port.
• When you double-click an iSCSI port in the tree, a list of host groups appears represented by the
following icon:
icon. For more information about host modes, see
• When you double-click a host group in the tree, a list of host bus adapters appears represented by the
following icon:
icon.
NOTE:
hosts and the disk array.
• When you double-click a port to which LUN security is not applied, the host groups except for the first
group (host group 0) are dimmed. If you double-click a dimmed host group, the contents of the LU Path
table ("LU Path
30 LUN Manager for the XP128/XP1024
. The host group number, host group name, and host mode appear to the right of the
. The nickname and the iSCSI name of the host bus adapter appear to the right of this
Host bus adapters are adapters in host computers and are used as ports for connecting
table" on page 31) are dimmed.
Table 2.